The coating resins company find a location

Furniture

Industrial Wood

Water is now an option

  • High wet and dry film clarity
  • Ambient self cross-link
  • Rapid film hardness development

With a continued trend to water-based furniture coatings, it is essential polymers with the correct balance of properties are available to meet not ony VOC limitations but also performance specifications. SETAQUA® 6756 and SETAQUA® 6716 coupled with the harder SETAQUA® 6718 have been developed to meet industry needs.

A high performance dual cure water-based acrylic

  • New product launch
  • Dual cure capability
  • High film clarity and extended pot-life

Your customers' furniture coating line will be closed by their local authorities due to new environmental VOC emission regulations which cannot be met by traditional solvent-based coating technologies. The allnex water-based technologies built on 1k, 2k Isocyanate cure (dual cure) systems offer furniture and door makers opportunities to meet environmental controls with equal performance.

Water-based 2k water-based replacing solvent

  • High clarity
  • Low VOC
  • Water clean-up

At allnex, our water-based 2k Isocyanate cure secondary emulsions offer furniture and door makers opportunities to meet environmental controls with equal performance to traditional solvent-based 2k systems.

Tannin block where Cationic is not an option

  • Tannin block
  • Anionic
  • Fast dry

Many paint makers do not have a dedicated line to manufacture cationic-based tannin block sealers for tannin rich timbers. Our new anionic sealer, SETAQUA® 6993 is an option to be considered offering an anionic solution with similar outcomes.

Amino resins for high performance industrial wood coatings

  • Includes Buylated Urea Aminos
  • Includes formaldehyde free resins
  • For ambient and heat-cured wood coatings

allnex provides an industry leading portfolio of CYMEL®, SETAMINE®, and ETERMINO® amino crosslinkers and CYCAT® catalysts for industrial wood applications.  This diverse portfolio includes urea and formaldehyde free resins offering a range of product compositions and coating cure characteristics.

Eco-friendly crosslinker for solvent-based industrial wood

  • Formaldehyde free solvent-based
  • Fast cure and Early coating hardness
  • Long pot life versus isocyanates

CYMEL® NF 3041 crosslinking resin is a formaldehyde free product designed for solvent-based coatings. The product does not contain or emit formaldehyde during cure and delivers very good industrial wood coating properties. It provides longer 2K pot life compared to isocyanate systems while still providing fast cure and early coating hardness development in both ambient and heat curable applications.

UV LED curing meeting latest in-use requirements, including haptics

  • LED curing
  • High Reactivity, throughput and productivity
  • High gloss, matte effect, soft touch

Our broad range of UV curable acrylates (UV/EB EBECRYL® or waterborne UV UCECOAT®) will help you in formulating coatings with excellent scratch and abrasion resistance, with clear or pigmented coating, in combination with outstanding appearance, durability, and little or no VOC emissions. Our resins will enable increased productivity and lower overall costs per cured part. Our new LED booster EBECRYL® LED 03 and our most reactive resins will help you designing formulations for LED curing.

Ready for the next generation of waterborne UV resins?

  • Performance boost
  • Cost-effective
  • Fit for industrial process

UCECOAT® 7230 is a resin modifier that can enhance the performance of waterborne UV PUD formulas in the most challenging applications, such as those that require outstanding chemical and stain resistance or durability in high humidity conditions.
UCECOAT® 7510 is a fit-for-use UV PUD for waterborne UV formulations designed for industrial wood applications. It offers a great overall balance of properties and low yellowing upon cure for simplified color matching. It is an ideal partner for applications requiring color accuracy.
UCECOAT® 7630: is a new UV-cure polyurethane dispersion for industrial wood application, with excellent balance of properties and best in class inter-coat adhesion. It is the ideal choice for pigmented system, white and colors, and a nice fit for natural wood look systems.

Sustainability becomes reality in coatings

  • Renewable content
  • Mass balance certification
  • C14 certification

Sustainability is getting more and more attention from brand owners, especially in the furniture industry, triggering an increasing demand for renewable resources-based content in our resins. Contact us to learn more about our renewables-based resins portfolio!

Xavier, allnex belgium

TSBD Manager Radcure EMEA

What's your challenge?

Developing unique solutions is a joint effort

We have the experience and knowledge to find the right resins, crosslinkers and additives for you.

Contact Us Today

allnex product highlights

Furniture

Layer Technology Product Benefits
All layers, interior furniture Waterborne acrylic SETAQUA® 6716 SXL acrylics with very high wet and fry film clarity with rapid development of early block resistance.
Interior furniture coatings, topcoats Waterborne acrylic SETAQUA® 6516 A secondary emulsion acrylic for 2K Isocyanate cure coatings.
Interior furniture coatings, topcoats Waterborne acrylic SETAQUA® 6795 A dual cure waterbased primary acrylic witha choice to use both as a 1k and/or 2k crosslinking system with Isocyanate. Offers rapid dry and film hardness development along with excellent dry film clarity and extended pot-life.
Interior & exterior sealer for tannin rich timbers Waterborne acrylic SETAQUA® 6993 An anionic primary acrylic offering the ability to block tannin same or better as commercial cationic acrylics so can be handled in standard paint making facilities without the need for dedicated plant. With increasing use of recycled, low cost timbers, the need for these solutions is ever increasing.
Paper upgrade Polyester acrylate EBECRYL® 4175 Hard, high gloss. For clear and pigmented primers and topcoats, good sandability, adhesion and intercoat adhesion; improves scratch resistance of UV topcoats.
Paper upgrade  Polyester acrylate EBECRYL® 809 Good flexibility. Surface hardness. Toughness. Moderate viscosity.
Wood Aliphatic urethane acrylate EBECRYL® 5129/20 HD High reactivity, scratch, chemical and abrasion resistances.
Wood Epoxy acrylate EBECRYL® 600/35 OT Good pigment wetting.
Wood Polyester acrylate EBECRYL® 810 Pigment wetting, low viscosity.
Wood Polyester acrylate EBECRYL® 851 High (good) hardness and chemical resistance.
Wood Polyester acrylate EBECRYL® 4381 Hard, reactive. For clear and pigmented primers and topcoats; improved in reactivity, good adhesion and sandability.
Wood WBUV-PUD UCECOAT® 7700 Very high hardness and scratch resistance, high stain and blocking for high end furniture top, included pigmented chemical resistance.
Wood WBUV-PUD UCECOAT® 7788 Versatile resin with good stability and good balance of coating properties, wide comopatibilities with resins and additives.
Wood WBUV-PUD UCECOAT® 7655 High stain resistance, scratch and reactivity in white pigment and clear.
Wood WBUV-PUD UCECOAT® 7674 High adhesion and wetting on wood. Resoluble in water before UV cure.
Wood WBUV-Urethane acrylic solution UCECOAT® 6558 High wood wetting adhesion and flexibility. Resoluble in water before UV cure.

 

Crosslinkers for your coating formulations
Technology Product Benefits
Formaldehyde free CYMEL® NF 3030 Waterborne borne formaldehyde free crosslinker allowing for formulation of ultra-low VOC coating systems.
Formaldehyde free CYMEL® NF 3041 Solventborne formaldehyde free crosslinker for wood and plastic applications, excellent film properties.
Melamine - methylated CYMEL® 304 Fast-curing version of HMMM for wood coatings for lower temperature cure applicatiaons, free formaldehyde <0.1%.
Urea-butylated CYMEL® UI-19-I Iso-butylated urea resin with good cure used primarily in interior and non-UV resistant applications.
Urea-butylated CYMEL® UI-21-E Iso-butylated urea resin in ethanol; fast curing; low formaldehyde emission.
Urea-butylated CYMEL® U-1051 Iso-butylated urea resins with fast cure and excellent compatibility.

 

Additives for your coating formulations
Technology Product Benefits
Flow & leveling MODAFLOW® LAMBDA Unique polymeric hybrid acrylic-silicone leveling additive - achieving highest levels of DOI at 1/2 the dosage of traditional systems without free silicone.
Flow & Leveling MODAFLOW® AQ 3025 MODAFLOW® AQ-3025 provides outstanding surface appearance in waterborne paint systems.  FDA approved, this additive enables reduced levels of pigment dispersant. 
Flow & leveling ADDITOL® XW 6580 ADDITOL® XW 6580 is a leveling and substrate wetting agent based on polyether modified siloxane for waterborne and solventborne paint systems giving strong surface tension reduction without foam stabilization or increasing slip. 
Flow & Leveling ADDITOL® XW 395 Wet through those difficult to adhere to substrates and realize superior leveling with this silicone free flow and leveling additive in all waterborne applications.
Dispersing ADDITOL® XW 6565 Universal grinding medium for colorants.
Dispersing ADDITOL® VXW 6208/60 When the  performance of their paint is critical people turn to ADDITOL® VXW 6208/60 for a dispersant that enables development of optimum performance for solventbased based and zinc rich systems
Foam control ADDITOL® XL 6507  High performance silicone free deaerater for high clarity, high gloss SB  systems
Looking for a particular product?